Worship Facilities is part of the Informa Markets Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

DiGiCo_BR_logo.jpg

DiGiCo Launches A164D Wall LCD and A168D Stage for 4REA4 at ISE 2020

New Racks provide all the connectivity of the original A164 Wall LCD and A168 Stage, but with the additional advantage of Dante connectivity

AMSTERDAM, The Netherlands – February 2020 – ISE stand 7-K200 – DiGiCo is pleased to announce two new I/O Racks—the A164D Wall LCD and A168D Stage—for its acclaimed 4REA4 processing engine for networked audio in installations at this year’s ISE show in Amsterdam. Both Racks bring all the connectivity of the original A164 Wall LCD and A168 Stage, but with the additional advantage of Dante connectivity.

“With 4REA4, we enabled audio over IP, but until now it had to be on a dedicated network,” explains DiGiCo Technical Sales Manager Tim Shaxson. “Adding Dante connectivity not only adds the flexibility and familiarity of the Dante network protocol, but also means that consultants and integrators can take advantage of existing network infrastructure to drop I/O for their 4REA4 anywhere on the network.”

DiGiCo_A164D_Wall_LCD_LD.jpg

The new A164D Wall LCD from DiGiCo

The A164D Wall LCD is a 16-input, four-output I/O Expander that uses the Dante network protocol to provide fixed additional I/O anywhere on a network and is designed for wall or floor mounting. It comes with 16 Mic Preamps on XLR inputs with Phantom Power status LEDs and four XLR Line Outs with direct preamp control from the 4REA4 controller software. It can run at both 48K and 96k sample rates and is AES67 compatible. Primary and secondary Dante ports come with locking EtherCON connectors and can run in both redundant and switched mode. All LCD labels are dimmable and can be customized using Dante controller software.

DiGiCo_A168D_Stage_LD.jpg

The new A168D Stage from DiGiCo

The A168D Stage is a portable 16-input, eight-output I/O Expander, again using the Dante network protocol to provide additional I/O anywhere on a network. It comes with 16 mic preamps on XLR inputs with Phantom Power status LEDs and eight XLR line outputs with direct preamp control from the 4REA4 controller software. It runs at 48k and 96k and is AES67 compatible. Primary and secondary ports again come with locking EtherCON connectors and can run in redundant or switched mode.

www.DiGiCo.biz

Hide comments
account-default-image

Comments

  • Allowed HTML tags: <em> <strong> <blockquote> <br> <p>

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.
Publish